Projecta 12V 300W Modified Sine Wave InverterSKU: IM300
If you're after the convenience of 240V power while camping, then the IM300 inverter is ideal.
Projecta's extensive range of modified sine wave inverters offer a range of features that give you power wherever you want, whenever you want. From peak power start up technology for powering maximum loads from the moment you switch it on, to low battery voltage protection, superior noise filtering and an internally bonded earth system for complete peace of mind, Projecta has you covered.
900mm heavy duty battery cable with fitted battery clips for convenient connection.
AS/NZS approved 240V sockets. Inverter designed to Australian standard AS4763 Socket.
Power and fault lights with audible alarm if problem is detected.
Cooling fan to prevent over heating.
For all inverters being installed in a mobile application such as a caravan, a Mobile Safety Switch is highly recommended. Most vehicles do not have this basic protection, making them both unsafe and vulnerable to electrical faults. Add one in the upgrade options section on the right.
|Projecta 12V 300W Modified Sine Wave Inverter|
|Input||12V DC, 30A Max|
|No load current draw||0.57A|
|Output||230/240V AC 50Hz
(Modified Sine Wave)
|Output power||300W Continuous (600W Peak)|
|Inverter Classification||Equipotentially Bonded (EPB)|
|Low battery alarm||10.5 Volt|
|Shutdown||10 Volt (±0.2V)|
|Cooling fan||Constant run|
|Thermal shutdown||65°C (±5°C)|
|Fuse||1 x 40A|
|Ideal battery size||50-70Ah|
|Minimum battery size||24Ah, 200CCA|
|Run time with 300W on 24AH battery||40 min|
|Run time with 100W globe on 24AH battery||2 hours|
|Approvals||Electrical safety, EMC|
For more information, please read our full warranty policy