VICTRON 240V BLUETOOTH SMART CHARGER 24V

Victron Energy Blue Smart IP65 SLA/LiFePO4 Charger 24V + Alligator Clips & M8 Eyelets BPC122531014

The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. The Blue Smart IP65 Charger is a professional battery charger packed with features such as built-in bluetooth to the Victron Connect App (Available on both iOS and Android). The Blue Smart IP65 Battery Chargers are ideal for use on cars, camper vans, caravans, RV's, tractors, motorcycles and boats and in the garage or on the farm.

Recovery Function for Fully Discharged Batteries- Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. This Blue Smart Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals. Also, if caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage which this battery charger is designed to do.

Victron IP65 Blue Smart Battery Chargers:

• - Water, dust and chemical resistant
• - Seven step smart charge algorithm
• - Potential recovery of fully discharged ‘dead’ batteries
• - Automatic power supply function
• - Severe cold performance: down to -30°C
• - Several other battery life enhancing features
• - Temperature compensated charging
• - Low power mode to charge smaller batteries
• - Li-ion battery mode
• - Ultra high 95% efficiency “green” battery charger
• - Setup and configure, readout of voltage and current by Bluetooth Smart

Bluetooth Smart Built-In

Any Bluetooth enabled Apple or Android smart phone, tablet or other device can be used to monitor, change settings and to update the charger when new software features become available via the VictronConnect App.

The battery is charged, smartly... to perfect condition- The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.

Connect the battery with ease- The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.

Check the status of your battery remotely- The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.

The VictronConnect app- Setup, readout and configure your Blue Smart IP65 Charger via your smartphone.

You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen the readout of voltage and current is default available. Download your app for iOS and Android here at https://www.victronenergy.com/live/victronconnect:start

Storage Mode: less corrosion of the positive plates- Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.

Temperature Compensated Charging- The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Smart IP65 Charger measures ambient temperature during the test phase and compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.

Li-ion Battery Mode- The Blue Smart Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.

Ultra high efficiency “green” battery charger- With up to 95% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. DOWNLOAD MANUAL

PERFECT FOR USE IN A RANGE OF APPLICATIONS:

Durable, Safe and Silent-

• Low thermal stress on the electronic components.
• Protection against ingress of dust, water and chemicals.
• Protection against overheating: the output current will reduce as temperature increases up to 60°C, but the charger will not fail.
• The chargers are totally silent: no cooling fan or any other moving parts.

• 

  Bluetooth Smart Enabled: Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available

• 

  Recondition your Battery - A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.

• 

  Suitable for a wide range of battery types and sizes. No special tools needed for installation.