Ardent 48V 10A Lithium Battery Charger for 48V Lithium Battery

On sale! 13% off, save $50
$349.00 $399.00
In Stock (ready to ship)

Buy now, pay later

Interest free instalments

Four equal payments of $87.25/fortnight, with instant approval online. Learn more


Ardent 58.4V 10A Lithium Battery Charger for 48Volt Lithium Battery Systems with Anderson Plug Connection

A 48V 10A charger is essential for charging batteries that require a 48V DC input, such as electric bicycles, scooters, golf carts, or other electric vehicles. It can also be used to charge 48V battery banks in off-grid solar systems, backup power systems, or industrial applications. The 10A rating means that the charger can supply up to 10 amps of current to the battery, which can charge a 48V 10Ah battery in approximately one hour. 

ARDENT Lithium Iron Phosphate (LiFePO4) battery chargers are light and compact state-of-the-art battery chargers with a charging profile specifically designed to charge and maintain Lithium Iron Phosphate (LiFePO4) batteries, and can safely achieve a 100% State of Charge. This 48V 10A model charger operates from mains power AC 200-260V as input, supplying up to 10A charging output suitable for nominal 48V LiFePO4 battery banks. The charger's built-in three stage lithium charging technology provides protection against Over Voltage and Over Current output, Short Circuit and Reverse Polarity.

ARDENT 58.4V 10A model Lithium Battery Chargers are optimized for use with lithium iron phosphate batteries (LiFePO4). Rated at 10amps this is the perfect size for any 48V lithium battery setup. Lithium batteries benefit best from being charged using a LiFePO4 compatible battery charger and this product uses three-stage charging mode-constant current, constant voltage, trickle (or floating charge).

Ardent 58.4Volt - 10A Lithium ​LiFePO4 Battery Charger for 48Volt Battery Systems

ARDENT Lithium Iron Phosphate (LiFePO4) battery chargers have a built-in Protection System to prevent damage to the charger from almost any external accidental occurrence that would normally cause damage. The internal Protection System will automatically disconnect to prevent damage to the charger, and will automatically reconnect when the error condition has been resolved.

  • - Water, dust and chemical resistant
  • - Potential recovery of fully discharged ‘dead’ batteries
  • - Automatic power supply function
  • - Severe cold performance: down to -30°C
  • - Several other battery life enhancing features
  • - Temperature compensated charging


  • Connect to your lithium battery with ease
  • The charger comes with both crocodile clips and M8 eyelets - with Anderson Plugs making it easy to connect to the battery. 
  • Suitable for Battery Voltage: 48Volt
  • Output voltage: 58.4V (For Lithium Batteries)
  • Output current: 10A


Ardent Lithium Battery Chargers provide protection from short circuit, over-voltage, over temperature and reverse polarity.


  • Pre-charge 1 – This stage is active only if the battery is severely discharged and helps to protect and recondition the cells against damage.
  • Pre-charge 2 – Soft start, moderate charging at the beginning to prevent the peak current damaging the cells.
  • Bulk Charging – Maximum current, the current is fixed according maximum capability of the charger.
  • Absorption – Charging with declining current to maximise the battery capacity.
  • Analysis – Determines the battery charge status and the battery saturation.
  • Power-off mode – Shuts down voltage and current when charging is complete. This avoids overcharging and variations in battery voltage caused by trickle current after charging.



We're here to help!
Freecall 1800 853 315

Ardent 58.4V 12V 10AMP Lithium Battery Charger with Anderson Plug & Alligator Clip

Ardent 48V 10A Lithium Battery Charger & Cables 

Features a trickle charge mode that will protect the battery. This will increase battery validity and performance. It also prevents your lithium battery from over charging with three-stage charging mode-constant current, constant voltage, trickle (or float charge).

A 10A charger is good for lithium batteries because it can provide a suitable charging current, which can help to charge the battery faster than a lower amperage charger. Additionally, charging a lithium battery at a constant current is highly efficient, and a 10A charger can help to ensure that the battery is charged in a timely and efficient manner. Lithium batteries are typically designed to be charged at a constant current until they reach a certain voltage, at which point the charger switches to a constant voltage mode. During the constant current stage, the battery is charged as quickly as possible while maintaining safe operating conditions. A 10A charger can provide a higher current than a lower amperage charger, which can reduce the overall charging time.

The 58.4V 10A model charger operates from mains AC 200-260V as input, supplying up to 10A charging output suitable for nominal 48V lithium LiFePO4 battery banks. 

Battery charging is when you are requiring to recharge a flat or dead battery to full. Battery maintenance on the other hand is when you just want to keep a battery topped up. For instance, if you're storing a classic car that you only drive a few times a month but want to ensure it's ready to go on a sunny afternoon you would require battery maintenance as opposed to battery charging. This is often referred to as trickle charging a battery. All ARDENT lithium battery chargers perform both functions.

– Automatic low voltage, battery recovery mode

– Advanced high frequency switch mode technology

– DC output isolated from AC input

– Universal Input 110-240VAC 50-60Hz

– Efficiency > 95%

– Fan forced ventilation

– 100% full load burn in tested

– Anodized aluminium enclosure

– 2 Year Replacment Warranty 


ARDENT lithium battery chargers are based on a CV/CC (constant voltage/constant current) charge algorithm. The charger limits the amount of current to a pre-set level until the battery reaches a pre-set voltage level. The current then reduces as the battery becomes fully charged. This system allows fast charging without the risk of over-charging and is suitable for Lithium Iron and other battery types. Ultimately, using an ARDENT battery charger with a specific Lithium charge algorithm is the best option for maximum performance and lifespan of any lithium battery. 

● The indicator of LED: Red is charging, green is charge finished or prepare charging

● Stable, High-Efficiency, Safe,

● Precise limit of voltage & current protection

Protection System Features:

  • Over Voltage Protection - When the charger output voltage exceeds the maximum charging voltage, the charger enters a standby state. It will restore to normal working conditions automatically after troubleshooting.
  • Over Current Protection - When the charger output current exceeds the maximum charging current, the charger enters a standby state. It will restore to normal working conditions automatically after troubleshooting.
  • Short Circuit Protection - When the charger detects a short circuit at output terminals, the charger enters a short-circuit protection state. It will restore to normal working conditions automatically after troubleshooting. 
  • Reverse Polarity Protection - When the charger detects that the polarity at the output terminals are reversed, the charger enters a reverse polarity protection state. It will restore to normal working conditions automatically after troubleshooting.

This Protection System is designed to last throughout the life of the charger and provide reliable charging for thousands of cycles.

Freecall 1800 853 315




Get a bigger Lithium Battery Size for your Complete Portable 12V Setup.

View Now
Upgrade to Australian made Lithium

Grab a Multi-Buy Discount

Australian Made Lithium Deep Cycle Batteries & Battery Box Kits

View Now

Complete Battery and Solar eBook

If you'd like to learn more about Deep Cycle Batteries and Solar, take a look at our free Complete Battery and Solar eBook. We've covered a lot of common questions and provided a bunch of good general knowledge information to help you make informed choices when purchasing.


  • Deep Cycle Batteries
  • Portable Solar Panels
  • Portable Fridges
  • Generators
  • Battery Chargers
  • Inverters



No product reviews yet - be the first!

Write a product review


Ardent 58.4V 10A Lithium Battery Charger for 48V Lithium Battery

  • Output power:360W
  • DC output voltage: 58.4V 10A
  • LED indicator light logo: red and green, double color instructions, red charging green finished or standby
  • Battery Type: 48Volt Lithium 
  • Output parameter - 58.4V
  • Charging current 10(A)
  • Dimensions 180x90x63mm
  • Shell material: Aluminum Shell
  • Working temperature: -5℃ ~ +40℃
  • Storage temperature: -40℃ ~ +70℃
  • For 24V Deep Cycle batteries, you should set your charger profile to charge up to 29.2 volts for 30 minutes and then float charge at 27.6 volts.
  • The standard charging voltage of a 36V lifepo4 battery is 43.8V. If you use a charger with a voltage lower than 43.8V, then your battery will never be fully charged.
  • For 48V Deep Cycle batteries, you should set your charger profile to charge up to 58.4 volts for 30 minutes and then float charge at 55.2 volts.

Download Operating Manual


2 year charger warranty - 2 year full replacement warranty guaranteed from manufacturer's defects

For more information, please read our full warranty policy

Related products