24V Blue Smart IP22 Chargers (1 or 3 Output) 230V

24V Blue Smart IP22 Chargers (230V)

Comes in 1 Output or 3 Output Model 

Free Shipping Australia Wide

WORKS WITH ANY DEEP CYCLE BATTERY TYPE ( LIFEPO4 - AGM - GEL )

The Blue Smart Chargers come in three series IP22, IP65 and IP67. Along with the individual IP ratings, each has advantages for specific applications. The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. The Victron IP22 Blue Smart Chargers with are professional grade, and all come with built-in Bluetooth, which allows monitoring the battery’s status and charging via a smartphone, tablet.or laptop.

- IP22 Smart Charger Features: 
- Built-in Bluetooth
- One or Three Outputs
- Suitable for Lithium Batteries
- Multi-Stage Charging
- Recovery of Fully Discharged Batteries

Suitable for using Lithium, AGM, GEL and Lead Acid chemistries in automotive, marine, off-grid, lithium, caravan, camper, motorbike, and more.

The chargers come with preset settings; however, they can be reconfigured if required using the VictronConnect App

THIS LISTING IS FOR THE 24V MODEL IF YOU NEED A 12V MODEL CLICK HERE 

> SIMPLE TO INSTALL & USE 

BATTERY CHARGER MANUAL DOWNLOAD

NOTE: The Victron IP22 Chargers do NOT come with cables to connect the charger to the battery. See the IP65 range of chargers if built-in cables are required.

Discover the advanced Blue Smart IP22 Charger, a powerhouse for off-grid energy solutions, recreational vehicle (RV) systems, and meticulous battery care. This intelligent charger is not merely a device but a dynamic power companion that customizes its approach to meet the unique demands of your battery setup.

Seamless Wireless Control and Real-Time Updates

Experience the convenience of Bluetooth integration that brings smart wireless monitoring to your fingertips. Effortlessly control and modify charger settings, and keep your system updated with the VictronConnect app—transforming your mobile device into a sophisticated energy management console.

Peak Efficiency for Eco-Friendly Power Management

Achieving up to 94% efficiency, the Blue Smart IP22 Charger stands out in energy conservation, significantly reducing heat production and lowering standby power draw to a mere 0.5 Watt. This efficiency translates into less waste and more savings, epitomizing eco-friendly charging practices.

Smart 6-Stage Charging Algorithm for Enhanced Battery Life

Equipped with a microprocessor and an 'adaptive' 6-stage charge algorithm, the charger provides meticulous care to extend battery lifespan. It tailors the charging cycle according to real-time usage—perfect for deep-cycle batteries in solar storage systems, RVs, and marine applications.

Proactive Storage Mode to Minimize Battery Deterioration

When idle, the innovative storage mode is activated to preserve battery integrity, minimizing the need for upkeep and protecting against the common pitfalls of disuse such as sulfation.

Universal Compatibility for Diverse Battery Technologies

From rugged lead-acid to advanced LiFePO₄ batteries, this charger is versatile. It offers predefined charging algorithms for most battery types and allows custom settings for specialized applications—ensuring that whatever your battery, it's charged correctly and safely.

Whisper-Quiet Charging with Specialized Night Modes

Embrace tranquility with NIGHT and LOW modes that promise silent operation, making the charger ideal for noise-sensitive environments like bedrooms in RVs or overnight stays in marine cabins.

Robust Thermal Protection for Uninterrupted Charging

Stay confident even in high temperatures, as the Blue Smart Charger dynamically adjusts its output to prevent overheating, assuring continued operation without risking damage to your system.

Intuitive LED Interface for At-a-Glance Monitoring

Stay informed with a glance thanks to the clear LED indicators that convey the charger's status, mode, and health of the charging process, eliminating guesswork and simplifying maintenance.

With its comprehensive features and sturdy construction, the Victron Blue Smart IP22 Charger is your go-to for advanced battery management, ensuring your off-grid adventures and RV travels are always powered by reliability and efficiency.

Comes with Free Shipping Australia Wide

REMOTE MONITORING AND CONTROL

Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available:

•  Automotive: Whether you have a car, truck, or motorcycle, the Victron Blue Smart Charger can help keep your battery charged and healthy. The charger’s multi-stage charging algorithms ensure your battery is charged efficiently and safely. At the same time, the built-in Bluetooth allows for easy monitoring and reconfiguration via the VictronConnect App.
• Marine: The Victron Blue Smart Charger is an excellent choice for marine vessels, including boats and yachts. Its IP ratings show the protection level against dust and water, so you can determine the suitability for wet environments. In addition, the charger’s recovery and reconditioning features make it ideal for maintaining lead-acid batteries commonly used in marine applications.
• Off-grid: If you’re living off the grid, the Victron Blue Smart Charger is essential for keeping your battery bank charged and healthy. The charger’s storage mode helps prevent sulfation, a common cause of premature battery failure. In addition, the built-in Bluetooth allows easy monitoring and reconfiguration via the VictronConnect App.
• RVs and Motorhomes: The Victron Blue Smart Charger is an excellent choice for RVs and motorhomes, thanks to its multi-stage charging algorithms and built-in Bluetooth. It can help keep your batteries charged and healthy while on the road, ensuring you have reliable power wherever you go.
• Lithium Batteries: Lithium batteries are becoming increasingly popular in various applications. The Victron IP22 Blue Smart Charger is suitable for charging LiFePO4 lithium batteries. The charger’s bulk, absorption, and float algorithms ensure your lithium battery is charged safely and efficiently. At the same time, the built-in Bluetooth allows for easy monitoring and reconfiguration via the VictronConnect App.
• Workshops: The Victron IP22 Blue Smart Charger is also suitable for use in workshops, garages, and other settings where batteries must be charged and maintained. Its recovery and reconditioning features can help restore “dead” batteries. At the same time, the built-in Bluetooth allows for easy monitoring and reconfiguration via the VictronConnect App.

NEED A 12V LITHIUM BATTERY CHARGER (LIFEPO4) ?

Fully programmable charge algorithm

Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm.

Storage Mode: less maintenance and aging when the battery is not in use

The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple bulk – absorption – float algorithm.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting

When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating

Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail.

• Built-in Bluetooth: The Blue Smart chargers have built-in Bluetooth, allowing you to monitor your battery’s status and adjust settings via your smartphone, tablet, or laptop. This feature also allows for reconfiguring the charger through the VictronConnect App.
• Cabling and Quick Fit Connectors Included: The charger comes with a 1.5m cable, alligator clips, and M8 eyelets with quality quick-fit connectors, making it easy to connect to your battery.
• Suitable for Lithium Batteries: The Victron Blue Smart Charger is designed to charge (LiFePO4) lithium batteries with bulk, absorption, and float algorithms. It can be reconfigured for specific batteries using the VictronConnect App.
• Multi-Stage Charging: The charger uses smart algorithms for AGM, GEL, and lead-acid batteries, ensuring that your battery is charged efficiently and safely.
• Recovery of Fully Discharged Batteries: The Blue Smart Chargers can attempt to recharge deeply-discharged batteries. This feature is not found in most chargers.
• Battery Reconditioning: The charger can partially reverse sulfation in lead-acid batteries that are insufficiently charged or left discharged by charging the battery with a low current up to a higher voltage.
• Storage Mode: The charger’s storage mode ensures that the voltage is raised back to the absorption level weekly if the battery has not been discharged for 24 hours. This helps prevent electrolyte and sulfation stratification, which is a significant cause of premature battery failure.
• 5-Year Warranty: You can confidently purchase the Victron Blue Smart Charger, knowing that it is backed by a five-year replacement warranty.

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

Bluetooth Smart

The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.

High efficiency

With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard.
And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage

The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Eleven LEDs for status indication

Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION.

Forty cycle history log

The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles.

VE.Smart Networking

The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart.

Optional battery voltage and temperature compensation, and current sensing

The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current.

Synchronized parallel charging

Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption.

Synchronized parallel charging has several interesting advantages:

- Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. - Flexibility: simply add a charger to the network if more current is needed.
- Cost: several low power chargers will in general cost less than one high power charger.
- Installation: several low power chargers may be easier to fit in a confined space.

Looking for an MPPT Learn More ?

MPPT charge controllers can be a powerful component of your solar system. They not only manage the charging of the battery bank from the solar panels, but they are also able to convert the higher voltage of the solar array to the lower voltage of the battery bank. This allows you to design highly efficient solar systems.** You take the total watts of the solar array divided by the voltage of the battery bank. That will give you the output current of the charge controller. For example, a 1000W solar array ÷ 24V battery bank = 41.6A. The rating of the charge controller should be at least 40A

•  USE THE HANDY CALCULATOR BELOW 

LEARN MORE: MPPT 100/20, the first number is the maximum PV open circuit voltage. The second number, 20, is the maximum charge current. Use the Victron MPPT Excel sheet or Online MPPT Calculator for PV sizing calculations. For more information about PWM or MPPT charge controllers, read the Victron whitepaper: which solar charge controller: PWM or MPPT?