Orion IP67 24/12 and 12/24 DC-DC Converters

SKU: Victron-ORI241205260

Customer Service Freecall Sales

Available Options
DC-DC Converter:

Free Delivery Australia Wide!

Recommended Extras

2 BnS Parallel Cables 350mm length (2 pairs)(+$60.00)

2 BnS Parallel Cables 350mm length (3 pairs)(+$90.00)

| Buy now, pay later

Interest free instalments

Four equal payments of $19.99/fortnight, with instant approval online. Learn more

Victron Orion-Tr DC-DC Converters - IP67 Waterproof, Shockproof and Ignition Protected

Free Shipping Australia Wide

Welcome to our "Non-isolated DC-DC Converters" category, a comprehensive collection of high-performance converters designed for a wide range of applications. These converters are essential components in various electronic systems, where they efficiently convert one level of DC voltage to another without isolation between input and output. The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth to enable remote monitoring. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the starter battery are used to charge the service/leisure battery. The Orion-Tr Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.

This model is Completely encapsulated: waterproof, shockproof and ignition protected:

Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.

Comes in Five Models :

Key Features of All Victron Non-isolated DC-DC Converters:

Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin.
Extra-long input and output cables: Thanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed.
Wide input voltage range: With 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery. Protected against overheating It can be used in a hot environment such as a machine room.

CHOOSE YOUR OPTON

> Victron Energy Orion IP67 24/12-5A 5 AMP DC-DC Converter, Non-Isolated (60W)

The Victron Orion-Tr 24/12-5 (60W) is a high-efficiency, non-isolated DC-DC converter, ideal for various applications where a stable 12V output is needed from a 24V source. It's particularly suitable for automotive, marine, and industrial applications. Victron Orion-Tr 24/12-5 (60W) DC-DC Non-isolated Converter. Boasting over 95% efficiency, easy installation, and IP67 protection, it's perfect for 24V to 12V power conversions. This device is remote on/off makes a high voltage switch also used as a battery charger. Short circuit resistance and parallel switching possible. With adjustable output, easy to set up. Operated with a low power.

> Victron Energy Orion IP67 24/12-Volt 10 AMP DC-DC Converter, Non-Isolated (120W)

The Victron Orion-Tr 24/12-10 (120W) is a high-efficiency, non-isolated DC-DC converter, ideal for various applications where a stable 12V output is needed from a 24V source. It's particularly suitable for automotive, marine, and industrial applications. Victron Orion-Tr 24/12-10 (120W) DC-DC Non-isolated Converter. Boasting over 95% efficiency, easy installation, and IP67 protection, it's perfect for 24V to 12V power conversions.

> Victron Energy Orion IP67 24/12-20A 240W DC-DC Converter Non-Isolated

The Victron Orion-Tr 24/12-20A (240W) is a high-efficiency, non-isolated DC-DC converter, ideal for various applications where a stable 12V output is needed from a 24V source. It's particularly suitable for automotive, marine, and industrial applications.Orion-Tr 24/12-20A (240W) (220W) DC-DC Non-isolated Converter. Boasting over 95% efficiency, easy installation, and IP67 protection, it's perfect for 24V to 12V power conversions.

Victron Orion IP67 24/12-100A (1200W) DC-DC Converter Non-Isolated

The Victron Orion-Tr 24/12-100A (1200W) is a high-efficiency, non-isolated DC-DC converter, ideal for various applications where a stable 12V output is needed from a 24V source. It's particularly suitable for automotive, marine, and industrial applications.Victron Orion-Tr 24/12-100A (1200W) DC-DC Non-isolated Converter. Boasting over 95% efficiency, easy installation, and IP67 protection, it's perfect for 24V to 12V power conversions.

Victron Orion IP67 24/12-50A (1200W) DC-DC Converter Non-Isolated

The Victron Orion-Tr 24/12-50A (1200W) is a high-efficiency, non-isolated DC-DC converter, ideal for various applications where a stable 12V output is needed from a 24V source. It's particularly suitable for automotive, marine, and industrial applications.Victron Orion-Tr 24/12-50A (1200W) DC-DC Non-isolated Converter. Boasting over 95% efficiency, easy installation, and IP67 protection, it's perfect for 24V to 12V power conversions.

Watch Our Videos to Learn More

Comes with Free Shipping Australia Wide

REMOTE MONITORING AND CONTROL

Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:

Solar Gauge – Realtime power output
Battery Voltage
Battery Current
Battery State
History Analysis
Various Settings

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect.

If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.
NEED A 12V LITHIUM BATTERY CHARGER (LIFEPO4) ?

We're Here to Help!

For Expert Advice — CONTACT US

>DOWNLOAD ENCLOSURE DIMENSIONS

Our selection includes converters with varying input and output voltage ranges, ensuring compatibility with a diverse array of devices and power systems. Whether you're integrating a simple power supply in a consumer device or designing a sophisticated automotive power system, our non-isolated DC-DC converters provide the reliability and efficiency you need. Explore our range to find the perfect non-isolated DC-DC converter for your application, backed by detailed product specifications, customer reviews, and expert support.

Key Features Of All Converters:

High Efficiency: Utilizes synchronous rectification technology, ensuring full load efficiency exceeds 95%, significantly reducing energy loss.
IP67 Protection: Offers a degree of protection against foreign bodies and moisture, especially when installed with screw terminals oriented downwards.
Easy Installation: Equipped with screw terminals, requiring no special tools for installation, simplifying the setup process.
24 Volt Models: Designed specifically for systems with a 24V input voltage.

The Orion-Tr converter is ideal for systems that require a stable and efficient reduction from a 24V power source to a 12V output, such as in vehicles with 24V electrical systems but needing to power 12V devices

High efficiency Using synchronous rectification, full load efficiency exceeds 95%. IP67 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation.

SIMPLE AND EASY TO USE: Orion-Tr DC-DC converters, Non-Isolated

Select a cool, dry and ventilated area.
First connect the ‘minus’ supply cable to one of the minus terminals of the Orion. The two minus terminals are interconnected. Please note that a bad minus connection could result in output overvoltage.
Connect the remaining cabling. (Orion-Tr 24/12-5: external 5A fuse required in input) The Orion is now ready for use.

Other Features:

A DC-to-DC converter is an electronic circuit or electromechanical device that converts a source of direct current (DC) from one voltage level to another. It is a type of electric power converter. Power levels range from very low (small batteries) to very high (high-voltage power transmission).

12V to 12V DC-DC Converters for Efficient Voltage Management

Explore our selection of 12V to 12V DC-DC converters, designed to ensure stable and efficient conversion of direct current. Optimize your electrical systems with our high-quality adjustable converters with a wide input range. Solar 4 RVs stocks the Victron range of DC-DC Converters.

FACTORS TO CONSIDER WHEN CHOOSING YOUR DC/DC CONVERTERS

Different pieces of equipment often require different voltages to power them.

In these cases it’s most common to design the battery at the voltage rating to handle the bulk of the requirements and then use a DC/DC Converter to step that voltage up or down to provide a secondary feed for the ‘orphaned’ equipment
that needs a different voltage.

This allows legacy 12V devices to be connected to a power system built around a newer 48V configuration.

1) How do I size a DC/DC Converter?

Firstly, look for a unit that has the correct DC/DC conversion. Most converters list their voltage rating in the order of source/load. So a "48/12" converter will take a source feed from a 48V battery and convert it to a 12V supply for 12V loads.

Once you've chosen the voltage conversion you need, then look for a unit with the loud outlet current value to suit your loads. This could be determined by adding all the maximum demand ratings of all your 12V loads (plus a buffer factor of course), but it should also be chosen while considering the ratings of any circuit fuses or switches protecting the loads. It is usually best if the DC/DC Converter can deliver 'a bit more' current that the switchgear will trip at. As always, ensure you consider cable ratings & voltage drop in your sizing's!

And lastly you need to consider inlet/outlet isolation.

Non-Isolated models have a common negative (ground) between the inlet and outlet sides. This can be convenient for vehicle applications that use common grounding to the vehicle chassis. They can also be smaller, lighter, cheaper and more efficient.
Isolated models have full galvanic isolation between the inlet and outlet circuits. In some applications this can provide a higher level of safety. The galvanic separation means the unit can assist in breaking ground loops and minimise noise for sensitive applications. It also provides a floating reference voltage for the outlet.

In most cases either type may be used.

2) When would it be a good idea to use a same/same voltage converter?

Some loads, particularly communications devices such as modems, can have a very limited operating window.

On the other hand, most solar systems will see the battery voltage fluctuate significantly between 'depleted' and 'under charge' states.

For example, a 12V battery could go down to 10.5V at a heavily discharged condition, then the next day it could be up around 14.5V while being recharged. In cold weather the charge voltage could be as high as 15V or even 16V.

If you need to use a load device that doesn't have the 'tolerance range' to handle that fluctuation, then a DC/DC Converter is the best way to 'smooth' the voltage so as not to damage the load device.

3) Can multiple converters be 'stacked' to deliver more current?

In most cases, yes, though it depends on the individual manufacturer.

4) Can different types of converters be used in one system?

Usually.

If you have a 48V system but need both a 12V AND a 24V feed for devices that cannot accept the primary 48V system's power, then it's normal to use a 48/12 and a 48/24 converter to supply the lower voltage circuits.

5) Why do the examples always 'step-down' the voltage? There are models that can 'step-up' too!

Lower voltages mean more losses due to voltage drop as well as higher current and heavier cable. In the interests of system efficiency I always prefer to design a system with a higher voltage battery and then use Converters to step it down as needed.

However, so long as the wiring & protection hardware is appropriately sized, starting from a lower voltage and stepping up is perfectly fine.

In fact, if the majority of the loads are best operated at 12V then it's usually more efficient and reliable to design the battery at 12V (despite the voltage drop and cable gauge complications) and use step-up Converters to run the 'left over' 24V or 48V devices.

USE THE FREE MPPT CALCULATOR BELOW

Australian Owned & Operated

100AH Lithium Deep Cycle Battery Online Designed for Off Road and Heavy Duty Applications

Perfect for use in caravans, marine, camping and home storage off grid applications. Solar, wind or battery charger compatible. Designed to handle the vibration when off road.

100AH Lithium Deep Cycle Battery Online Reliable 12V Power

Campers appreciate being able to charge multiple devices simultaneously while enjoying a peaceful camping experience.

100AH Lithium Deep Cycle Battery Online Portable Power Solutions

Superior Versatility: This MPPT is ideal for 4WDs, caravans, RVs, trucks, campers, trailers, campervans, commercial vehicles and boats.

100AH Lithium Deep Cycle Battery Online Easy to Use and Setup

This plug-and-play MPPT is so user-friendly that anyone can set it up. Multiple Protection: Over-charge, short circuit, over-temperature, over-voltage, solar input overload and reverse polarity protection are incorporated.